Single-layer & Single-chamber Solar Panel Laminator is the most simple and basic type of automatic laminator.
Easy to repair and maintain: Side door adopts air spring open/close mesh door, more convenient for repairing and maintenance.
Strong adaptability: Compared to the double-layer model, the single-layer series has lower load bearing and workshop height requirements.
Shorter cycle time: Fixed unloading stage with enough fans release a shorter cycle time.
Large upgrade space: the whole reserved hardware and software port, on the basis of the original unit equipment, can be a structural improvement to improve production capacity.
|Open height :||maintenance height 300mm/working height100mm|
|Laminating Chamber Thickness :||≥30mm|
|Heating Plate Thickness :||≥55mm|
|Control Mode :||Touch Screen|
|Temperature Control :||PID intelligent Control|
|Heating Method :||Oil heating|
|Power :||AC380V 50Hz 3-phase 5-wire|
|Heating Mode :||Oil Heating|
|Power Supply :||AC380V 50Hz 3-phase 5-wire|
|Total Power :||132KW|
|Temperature Uniformity :||±2℃|
|Temperature Range :||RT--180℃|
|Compressed Air Flow(max) :||3600/min|
|Compressed Air Pressure :||0.6MPa—0.8MPa|